中空玻璃生產線主要是分為有七段。

The insulated glass production line is mainly divided into seven sections.

一段是放玻璃,把玻璃放在生產線上。

One section is about placing glass on the production line.

二段是清洗風干,清洗這邊是靠風刀風干玻璃。

The second stage involves cleaning and air drying, while the cleaning process on this side involves using an air knife to air dry the glass.

玻璃清洗完成之后進入第三段第三段是檢查段，檢查玻璃干凈不干

After the glass cleaning is completed, enter the third section, which is the inspection section. Check that the glass is clean and not dry

第四段是鋁框安裝段，四段這里有下面的定位和上面的定位，鋁框順著定位把鋁框安裝在玻璃上,進入下一段。

The fourth section is the aluminum frame installation section, where there are lower and upper positioning. The aluminum frame is installed on the glass along the positioning and enters the next section.

第五段是和片段,玻璃順著上下兩個橫梁懸空過來，兩片合在一起。

The fifth paragraph is about the scene where the glass is suspended along the upper and lower crossbeams, and the two pieces are merged together.

進入第六段是平壓段,第六段把兩片玻璃壓合均勻。

Entering the sixth section is the flat pressing section, where the two pieces of glass are evenly pressed together.

壓實之后進入中空線的最后一段，等待段，這一段就等待進入中空玻璃全自動封膠線封膠。

After compaction, it enters the last section of the hollow line, the waiting section, which is waiting to enter the fully automatic sealing line for insulating glass.

本文由中空玻璃生產線友情奉獻.更多有關的知識請點擊: http://www.yalais.com真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is a friendly contribution from the production line of insulated glass. For more information, please click: http://www.yalais.com Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned