為了能夠確保丁基膠涂布機的正常運行，定期對設備進行常規的檢測是一個必須進行的工作。在檢測過程中可以及時的發現設備在技術，工作精度以及零部件運行時的隱患，對其進行針對性的修復措施，從而實現提升設備壽命和工作效率的效果。那么，在日常的設備檢測中，人們常用的方式有哪些呢？
In order to ensure the normal operation of the butyl rubber coating machine, regular inspection of the equipment is a necessary work. During the inspection process, hidden dangers of equipment in technology, working accuracy and parts operation can be found in time, and targeted repair measures can be taken to improve the equipment life and working efficiency. So, in the daily equipment inspection, what are the commonly used methods?
丁基膠涂布機如何進行檢測
How to detect the butyl adhesive coating machine

第一、初始露點以及紫外線照射
First, initial dew point and ultraviolet radiation
這是兩種非常基礎的檢測方式，在檢測時需要專屬的設備對丁基膠涂布機內的空氣干燥性，影響視線的有機發揮物進行檢查與測定。當在規定的條件中，露點小于或等于-40度，玻璃內沒有霧狀，油狀或者其他污物時方為合格。
These are two very basic detection methods. During the detection, special equipment is required to check and measure the air dryness in the butyl adhesive coater and the organic matter affecting the vision. It is qualified when the dew point is less than or equal to - 40 degrees and there is no mist, oil or other dirt in the glass under the specified conditions.
第二、密封檢驗
Second, sealing inspection
這種檢驗方式主要是應用在玻璃設備密封膠是否存在泄漏，且軟硬程度是否達標的情況。在進行密封檢查時，需要樣品在10±0.5KPA條件下保持2.5H厚度的增長偏差小于15%。當超過這個數值時則記為不合格。
This inspection method is mainly used to check whether the sealant of glass equipment has leakage and whether the hardness and softness meet the standard. During the sealing inspection, the sample is required to maintain a 2.5H thickness growth deviation of less than 15% under the condition of 10 ± 0.5KPA. If it exceeds this value, it will be recorded as unqualified.
第三、氣候循環的檢驗
Third, the test of climate cycle
在檢驗是需要丁基膠涂布機經歷一年四季的模擬氣候，期間需要加熱，自然冷卻以及強制制冷的操作，從而檢測玻璃在不同氣候下綜合性能。
In the test, the butyl rubber coating machine needs to experience the simulated climate all year round, during which heating, natural cooling and forced cooling operations are required to test the comprehensive performance of glass in different climates.
第四、高溫高濕實驗
Fourth, high temperature and humidity experiment
這種檢驗方式的檢驗是對密封膠的粘結力，水汽透過率以及分子篩的吸附能力的檢測，實驗時需要空氣濕度大于95%，溫度在25-55度之間，它通過循環實驗時中空玻璃內的氣體被壓縮和膨脹后的漏氣情況來判斷粘結力，水汽透過率是否達標。
The test of this test method is to test the adhesive force of the sealant, the water vapor transmission rate and the adsorption capacity of the molecular sieve. During the test, the air humidity should be greater than 95%, and the temperature should be between 25-55 degrees. It can judge whether the adhesive force and the water vapor transmission rate meet the standard by the air leakage after the gas in the insulating glass is compressed and expanded during the cycle test.
丁基膠涂布機的檢測方式大概就如此了，在日常使用中也要做好相關的檢測工作，這樣才能更好的確保設備的使用。
This is probably the way the butyl adhesive coating machine is tested. In daily use, it is also necessary to do a good job in the relevant testing work, so as to better ensure the use of the equipment.
以上就是為大家介紹的有關全自動丁基膠涂布機詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務以上就是為大家介紹的有關全自動丁基膠涂布機詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.yalais.com
The above is the detailed introduction about the fully automatic butyl adhesive coating machine introduced for you, and I hope it will help you. If you have any questions, please contact us. We will provide you with the attitude of. The above is the detailed introduction about the fully automatic butyl adhesive coating machine introduced for you, and I hope it will help you. If you have any questions, please contact us. We will provide you with the attitude of http://www.yalais.com