
玻璃涂布機設備的使用流程
時間:2024-05-28 來源:http://www.yalais.com/ 發布人:昌盛機械
1.開機前檢查各部件連接是否正確可靠。
1. Before starting up, check if all components are connected correctly and reliably.
2.打開電源開關。
2. Turn on the power switch.
3.按啟動鍵。
3. Press the start button.
4.按下"開始"按鈕。
4. Press the "Start" button.
5.根據所需噴涂的面積調整好氣壓。
5. Adjust the air pressure according to the required spraying area.
6.調節氣壓大小。
6. Adjust the air pressure.

7.選擇適當的涂料。
7. Choose the appropriate coating.
8.按動主電機按鈕。
8. Press the main motor button.
9.待涂料在管道內流動并達到設定值時即可關閉電源。
When the paint flows inside the pipeline and reaches the set value, the power can be turned off.
10.停機時應先停止進料后再切斷總電源。
10. When shutting down, the feeding should be stopped first before cutting off the main power supply.
以上就是有關:玻璃涂布機設備 的介紹,想了解更多的內容請點擊:http://www.yalais.com 我們將會全心全意為您提供滿分服務,歡迎您的來電!
The above is an introduction to the glass coating machine equipment. To learn more, please click: http://www.yalais.com We will wholeheartedly provide you with full score service. Welcome to call us!
- 中空玻璃打膠機,助您開啟高效生產新時代! 2026/02/19
- 中空玻璃生產線打膠機傳送V帶不平衡?這樣調,傳送平穩不跑偏 2026/02/13
- 中空玻璃生產線打膠難題:壓力夠卻打不滿膠?這樣排查就解決 2026/02/12
- 全自動封膠線實操科普:山東昌盛板壓段,筑牢封膠質量核心防線 2026/02/10
- 中空玻璃生產線實操科普:小玻璃清洗機反轉打滾?這樣解決最省心 2026/02/06
- 全自動封膠線實操科普:白膠泵密封圈這樣換,杜絕漏膠保順暢 2026/02/04
- 雙組份打膠機實操科普:出膠體這樣保養維護,延長壽命保順暢 2026/02/02
- 中空玻璃生產線:清洗機這樣保養,清潔高效更耐用 2026/01/30
- 全自動封膠線實操科普:板壓壓合效果差?四角落差這樣調精準 2026/01/28
- 雙組份打膠機實操科普:黑膠泵過濾這樣清洗,避免堵塞保順暢 2026/01/27

當前位置:



產品分類Product categories
聯系我們Contact us
