膠水沉降的處理方法
Treatment Method of Glue Settlement
雙液灌膠機設備是針對雙組份膠水運用的設備，該設備可以自動化的完成雙組份膠水的自動配比，自動混合，自動定量定位的灌膠操作，自動化設備的運用投入消費，很大水平上束縛了休息消費力，提升了灌膠產品的質量，以及灌膠產品的分歧性，便于企業提升全體的管理程度。設備是針對膠水運用的，很大水平上膠水的特性間接決議了設備的配備，以及設備的操作方式。
Dual-liquid glue filling machine equipment is for the use of two-component glue. The equipment can automatically complete the automatic mixing of two-component glue, automatic mixing, automatic quantitative positioning of glue filling operation, the use of automatic equipment input and consumption, to a large extent, restraint the rest of consumption, improve the quality of glue filling products, and the divergence of glue filling products, so as to facilitate enterprises to improve the whole. The management level of the body. Equipment is aimed at the use of glue, the characteristics of glue to a large extent indirectly determine the equipment, as well as the operation mode of equipment.
關于常規的雙組份膠水，運用常規的雙液灌膠機設備即可操作，但是關于特別品種的膠水，例如膠水中有少量填料，在靜置一段工夫后，膠水中的填料會在重力的效果下沉降到料筒底部，假設不能很好的處置這一成績，會間接影響到膠水混合后的特性，以及灌膠后產品的特性。所以就要求設備操作控制方面可以從運用中處置好這一成績，處置途徑首要分爲以下三個方面：
As for conventional two-component glue, it can be operated by conventional two-liquid glue filler equipment. But for special types of glue, such as glue with a small amount of filler, after a period of time, the filler in glue will settle to the bottom of the barrel under the effect of gravity. Assuming that this result can not be handled well, it will indirectly affect the characteristics of glue after mixing and glue filling. Product characteristics. Therefore, it is required that the performance of equipment operation control can be well disposed of in operation. The disposal approach can be divided into three aspects as follows:

一：許多膠水對溫度比擬靈敏，當膠水的溫度降低時，膠水的活動性會變好，膠水的活動性變好會愈加便于設備的控膠操作，同時也會形成膠外部填料的沉降速度放慢，這種狀況下就需求對出膠料筒添加一個旋轉拌和設備，讓膠水不時的膠桶外部活動，起到避免堆積的效果。
First: Many glues are sensitive to temperature comparison. When the temperature of glue decreases, the activity of glue will be better. The activity of glue will be better and easier to control the glue operation of equipment. At the same time, the settlement speed of external filler will be slowed down. In this situation, it is necessary to add a rotating mixing equipment to the rubber drum, so that the glue can move outside from time to time, so as to avoid stacking. The effect of product.
二：在料筒內膠水堆積處置的前提下，輸膠管的膠水堆積是不可防止的，由于保送膠水的管道是不能夠添加旋轉拌和設備的，所以就盡能夠的增加輸膠管的長度，也就增加了膠水在輸膠管內逗留的工夫。
2. On the premise of glue accumulation and disposal in the barrel, glue accumulation in the hose is unavoidable. Because the pipeline for guaranteeing glue can not add rotating mixing equipment, the length of the hose can be increased as much as possible, thus increasing the time for glue to stay in the hose.
三：關于設備短工夫中止運用的狀況下，設備要配有防固化功用，在雙組份混合的膠水發作固化前，將混合管內的膠水排出，短工夫的操作可以經過這種方式完成。假設較長工夫的停機，可以經過配備循環回流設備來完成，即讓管路內的膠水經過循環回流到儲膠料筒內，循環往復。
3. Under the condition that the equipment stops using in short time, the equipment should be equipped with anti-curing function. Before the two-component mixed glue is cured, the glue in the mixing tube is discharged. The short time operation can be completed in this way. Assuming a longer shutdown, it can be accomplished by equipping with recycling equipment, that is, the glue in the pipeline is recycled back to the rubber storage cylinder and recycled back and forth.
綜上所述有濟南昌盛機械提供，更多雙組份打膠機知識，歡迎關注我們的網站：http://www.yalais.com謝謝支持!
In summary, all the above-mentioned Jinan Changsheng Machinery provides more knowledge of two-component glue machine. Welcome to our website: http://www.yalais.com. Thank you for your support!