1.更換膠種時，清潔管路。此時，關閉進料閥，打開排放閥，排出膠桶中剩余的膠料，關閉排放閥，打開進料閥，將清洗溶劑倒入儲液桶中，按常規操作方法將溶劑壓出清洗。
1. Clean the pipeline when replacing the rubber seed. At this time, close the feed valve, open the discharge valve to discharge the remaining rubber in the rubber barrel, close the discharge valve, open the feed valve, pour the cleaning solvent into the liquid storage barrel, and press out the solvent for cleaning according to the conventional operation method.
2.如果進氣異常，發現水汽，請清除調壓過濾器中的水汽，或檢查氣源是否異常。在膠機大量使用前，請先小試，掌握產品使用技巧，以免出錯，試驗無問題時，再用雙液滴膠機或雙液膠機批量生產；真空系統，真空消泡處理膠，為了排除混勻過程中產生的氣泡，或在使用前站立10-20分鐘，以便使氣泡及時攪拌時產生，混合在一起的膠水量。
2. If the intake air is abnormal and water vapor is found, please clear the water vapor in the pressure regulating filter or check whether the air source is abnormal. Before the glue machine is widely used, please have a small test first to master the product use skills to avoid mistakes. If there is no problem in the test, then use the double liquid glue dropping machine or double liquid glue machine for mass production; Vacuum system, vacuum defoaming treatment glue, in order to eliminate bubbles generated in the mixing process, or stand for 10-20 minutes before use, so as to generate bubbles when mixing in time, and the amount of glue mixed together.
3.定期清潔機器部件，提高使用壽命。膠的混合量越多，反應越快，固化速度越快，因此有必要根據實際生產情況合理配膠，否則會造成膠料浪費。杜絕事故，提高生產效率。目前，液體控制技術和點膠設備在現代工業的各個生產領域得到了廣泛的應用。

3. Clean machine parts regularly to improve service life. The more the glue is mixed, the faster the reaction and the faster the curing speed. Therefore, it is necessary to mix the glue reasonably according to the actual production situation, otherwise it will cause a waste of glue. Eliminate accidents and improve production efficiency. At present, liquid control technology and dispensing equipment have been widely used in various production fields of modern industry.
4、機器長期停用時拔掉電源，不僅延長了機器壽命，而且節省了大量電。隨著工業發展的不斷變化，液體控制技術和配料設備也不斷向超高精度控制、多樣化和化方向發展。
4. Unplug the power supply when the machine is out of service for a long time, which not only prolongs the service life of the machine, but also saves a lot of electricity. With the continuous change of industrial development, liquid control technology and batching equipment are also developing towards ultra-high precision control, diversification and specialization.
注意：每次使用后，要做好清潔工作，再擦一下可以看到的地方，用酒精擦拭，點油或黃油在定期鍛煉的部位，保持潤滑，如果長時間不用需要打磨光膠水，否則在分配器內固化，需要花錢清理。
Note: after each use, do a good job of cleaning, wipe the visible place, wipe it with alcohol, point oil or butter, and keep it lubricated at the part where you exercise regularly. If you don't need to polish the glue for a long time, otherwise it will solidify in the distributor and need to spend money to clean it.
以上的精彩內容均來自：雙組份打膠機批發，更多的精彩內容請點擊進入我們的網站：http://www.yalais.com進行交流學習，我們后續會不斷的為您提供分享，敬請期待！
The above wonderful content comes from the wholesale of two-component gluing machine. For more wonderful content, please click to enter our website: http://www.yalais.com For exchange and learning, we will continue to share with you in the future. Please look forward to it!