中空玻璃有良好的節能效果和長久的密封性，如果中空玻璃節能性能差，即使耐久性和密封壽命再長，也是一個低檔次的中空玻璃。下面中空玻璃生產線廠家給大家介紹影響中空玻璃的性能因素。
Insulating glass has good energy-saving effect and long-term sealing performance. If the energy-saving performance of insulating glass is poor, even if the durability and sealing life are longer, it is also a low-grade insulating glass. Next, the manufacturer of insulating glass production line will introduce the factors affecting the performance of insulating glass.
在玻璃方面選擇有白玻還是低輻射玻璃、間隔條方面有冷邊(鋁間隔條)還是暖邊、氣體方面有空氣還是惰性氣體如氬氣。在其他條件不變的條件下，采用白玻、空氣和冷邊的中空玻璃的節能效果是非常差的，而采用低輻射玻璃、內充氬氣和暖邊的中空玻璃的節能效果是Z高的。雖然密封壽命較長，但熱傳導性高致使節能效果差，直接表現在中空玻璃邊部出現冷凝。
In terms of glass, choose white glass or low radiation glass, cold edge (aluminum spacer) or warm edge in terms of spacer, and air or inert gas such as argon in terms of gas. Under the condition that other conditions remain unchanged, the energy-saving effect of insulating glass with white glass, air and cold edge is Z poor, while the energy-saving effect of insulating glass with low radiation glass, filled with argon and warm edge is Z high. Although the sealing life is long, the high thermal conductivity leads to poor energy-saving effect, which is directly reflected in the condensation at the edge of insulating glass.

中空玻璃設備的強度怎么樣呢？剛度又是什么狀況呢？到底該怎么分析呢？下面就讓小編來為大家講解下中空玻璃設備的強度與剛度的分析。
How about the strength of insulating glass equipment? What is the stiffness? How to analyze it? Let's talk about the strength and stiffness analysis of insulating glass equipment.
在玻璃資料給定后，比方一般平板玻璃或鋼化玻璃，那么依據玻璃強度設計理論，玻璃原片的斷裂強度就斷定下來了。因?yàn)橹锌詹ＡC(jī)器出產的是由兩塊玻璃組成的玻璃，周邊密封構成一個密封的空氣層，中空玻璃在一面玻璃遭到載荷作用時，受力面玻璃變形緊縮中空層氣體，氣體壓強大，將有些載荷傳送給另一面玻璃，因此在氣體密封狀態下，中空玻璃是兩片玻璃一起承當載荷，兩片玻璃一起變形。
After the glass data is given, such as general flat glass or tempered glass, the breaking strength of the original glass sheet is determined according to the glass strength design theory. Because the insulating glass machine produces a glass composed of two pieces of glass, and the surrounding seal forms a sealed air layer. When one side of the insulating glass is subjected to load, the glass on the stress surface deforms and compresses the insulating layer gas. The gas pressure is high, and some loads are transmitted to the other side of the glass. Therefore, in the gas sealed state, the two pieces of insulating glass bear the load together, and the two pieces of glass deform together.
以上就是為大家介紹的有關全自動封膠機的詳細介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.yalais.com
The above is the detailed introduction of the automatic sealing machine. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.yalais.com